1. Product Introduction
What is TIG welding robot Arm? It’s a robot connected TIG welding power source, while arm is a manipulator. CROBOTP industrial TIG welding robot is CRP robot best seller which a lot of other brand of China can not do or can not do very well. Our technician study it for quite a long time so that it can be used for carbon steel, stainless steel and other materials.
2. Product Parameter
Model | Axis | Reach （mm） | Payload （kg） | Position Repeatability （mm） | IP Level | Robot Weight （kg） |
CRP-RH14-10-W | 6 | 1440 | 10 | ±0.08 | IP 67 | 170 |
CRP-RH18-20-W | 6 | 1720 | 20 | ±0.08 | IP 67 | 285 |
CRP-RH20-10-W | 6 | 1920 | 10 | ±0.08 | IP 67 | 288 |
3. Product Application
4. Product details
CRP has three different arm length which can be marched TIG welding power source. They are: 1440mm, 1720mm and 1920 mm. And 1440 is the best seller. In order to equip different brand of power source. CRP robot has special design of the control system. Now, including world wide brand Lincoln, Kemmpe, Fronius, etc and Chinese brand like Bingo, Megmeet, Aotai, etc. They can all be connected. Before you connect the unknown brand, please let us know in advance.
5. Product Qualification
6. Delivery time and service
Delivery time is 15 days. We have professional team to do after sales service. in our service department, we have 3 mechanical engineers, 2 electrical engineers and 4 software engineers. we provide good service to confirm the robot can work well in customer factory.
7. FAQ
Q: Is it possible to have life after 50 and learn how to TIG?
A: To be a skilled manual TIG welder after 50 is a little difficult, but if you can use Noah TIG welding robot, you will need only two hour to be expert in TIG welding.
Q: What are the best applications for a robotic TIG welding system?
A: High-volume, low-variety applications are well-suited to robotic welding; however, lower-volume, higher-variety applications may also work if implemented with the proper tooling. Companies will need to consider the additional cost for tooling to determine if the robotic welding system can still provide a solid return on the initial investment. As for TIG welding, the best application is thin pieces and metal.
Q: What’s high frequency start when TIG welding?
A: this type of TIG Welder uses a burst of high frequency (HF) to establish the welding arc. This is easier and more precise than a Scratch start or Lift TIG Welder, as the tungsten TIG electrode does not have to be touched down.
Q: What is lift TIG welding.
A: The lift start involves bringing the tungsten down quickly and lightly into contact with the metal, and then a quick lift up to “draw” the arc. What happens with lift start is the OCV of the welder cuts back to a very low voltage output when the unit senses it has made continuity with the work piece.
Q: Which one uses better? HF TIG welding or Lift TIG welding?
A: The most popular and best option is the use of High Frequency start that generates a high frequency arc that is capable of ionizing the air and bridging the gap between the tungsten point and the work piece. The High Frequency start is a touch-less method and creates almost contamination unless the tungsten is over sharpened or the amperage is turned too high at the start. It is an excellent choice for welding aluminum, and really is the only acceptable choice. Unless you need to weld Aluminum, you don’t have to really have High Frequency start, but it is nice to have to weld AC or DC if you have the option.
Hot Tags: industrial tig welding robot, China, manufacturers, suppliers, cheap, made in China, 1400 Mm Arm Length TIG Welding Robot, 1800 Mm Arm Length TIG Welding Robot, 6 Axis Industrial TIG Welding Robot, 6 Axis TIG Welding Robot For Stainless Steel, 9 Axis Industrial TIG Welding Robot, TIG Welding Power Source For Robot