1. Product Introduction
TIG welding robot machine is a 6 axis robot for TIG welding. It’s a automated machine which has very good consistency and saves a lot of work labor. This is very useful for large quantity and same size work piece which need very good welding performance.
2. Product Details
TIG are starts can greatly impact the tungsten tip wear, TIG weld start data can be critical especially with automated TIG welding applications. Tungsten life is improved with a times Start Ramp Up from a low current to the operating current. The TIG welding robot machine is proved to be a very good choice for thin plate not only for stainless steel but also for aluminum, brass, and other materials.
3. Product Application
4. Product Qualification
5. Delivery time and service
Delivery time is 15 days. We have professional team to do after sales service. in our service department, we have 3 mechanical engineers, 2 electrical engineers and 4 software engineers. we provide good service to confirm the robot can work well in customer factory.
6. FAQ
Q: That’s is to say CRP robot uses HF start when welding?
A: Yes, CRP Tig welding robot starts welding with HF, but there are some special problems need to be solved. If robot starts welding with HF, all the electronic devices will loss it’s functions so as to can not work any more.
Q: Then how to solve the effective HF start to electronic devices?
A: Yes, how to filter HF from the TIG welder is the most important way to prevent robot electronic devices to be destroyed. If you can come to our factory, I will show you the way to filter HF.
Q: Can CRP TIG welding robot use filler?
A: Yes, we are one of the few who can use filler when TIG welding. A lot of suppliers in the market may tell you that their robots can be used for TIG welding, you can ask him questions like: how to filter HF?, can your robot be used for TIG welding with filler?
Q: Can you explain how TIG welding robot work with filler roughly?
A: We use PLC to control the filler forward and backward. PLC also need to have filter HF device.
Q: How to control current when TIG welding?
A: With the TIG welding process it's especially important to control the current during the TIG "arc start" and at the "arc end." Our robot has expert data base, you only need to input the value of voltage and current, Robot will adjust voltage curve and current curve itself.
Hot Tags: tig welding power source for robot, China, manufacturers, suppliers, cheap, made in China, 6 Axis TIG Welding Robot, 6 Axis TIG Welding Robot For Stainless Steel, TIG Wire Feed System, 9 Axis Industrial TIG Welding Robot, MIG Welding Robot, 2000 Mm Arm Length TIG Welding Robot